Automatic Roll Paper Flatbed Die Cutting Machine

_Y9A5613-ok_副本.jpg


_Y9A5621-ok_副本.jpg

_Y9A5670-ok_副本.jpg


_Y9A5665-ok_副本.jpg

3_副本.jpg

MODEL

FD930*550

Die-Cutting Form

Flat Pressing and Die-Cutting, Embossing and Creasing Machine

Degree of Automation

Full-Automation

Customization

Yes

Cutting Precision

±0.2mm

Rated Cutting Speed

90-117 sheets/minute

Max Cutting Speed

7200pcs/hr

Max Cutting Pressure

150T

Max Cutting Paper Size(W×L)

900mm*520mm(W×L)

Max Roll Diameter

1600mm

Max Width of Feeding Material

900mm

Suitable Paper Weight

120g-500g

Total Rate Of Machine

15KW

Main Motor Power

7.5KW

Overall Dimensions

Around 5500m*2400m*1900m(L×W×H)


See video on Youtube: www.youtube.com/channel/UCxuVqgJ-z7q0XsIexnpzMpg


Performances and Applications

1. Load material: Electric roll material loading, which is easy and fast. The two rubber covered rollers are controlled by Traction Motor, so it’s very easy to make paper go forward automatically.

图片1_副本.png


2. Feed material: the photoelectric eye tracking system assures the synchronization of material feeding and die-cutting speed.

图片2_副本.png


3. Automatically fold and flatten the cornering materials at the paper core. It realized the multistage adjustment of the folding degree. No matter how bent the product is, it can be flatten or refolded towards other directions.

图片3_副本.png


4. Correction Unit: This device is controlled by Motor, which can fix and adjust the paper in a correct position. (left o right)

图片4_副本_副本.png图片5_副本.png


5. It can die-cut according to the printed words and figures or simply die-cut without them. The coordination between stepping motor and photoelectric eye which can identify colors assures the perfectly fit of the die-cutting position and figures. Simply set the feed length through the micro-computer controller to die-cut the products without words and figures.

Synchronous Belt Drive: High precision reducer ±0.2mm, to ensure feed accuracy. And Servo drive, easy to operate.

图片6_副本_副本.png


6. Die-cutting area: 900mm*520mm. (FD950*640, FD1050*640, FD1150*640, it can also be tailored according to the customers’ requirements)

7. Maximum die-cutting speed can be up to7200 times/h, which indicates the significant high production efficiency.

8. The die-cutting force is provided by a 7.5KW inverter motor driver. It is not only power-saving, but also can realize the stepless speed adjustment, especially when coordinate with the extra large flywheel, which make the die-cutting force strong and steady, and the electricity can be further reduced.

Pneumatic Cluth: High quality clutch can reflect rapidly and ensure high security.

图片7_副本.png图片9_副本.png


9. Adapt flat bed die-cutting mode, and the cutting boards are extremely cheap.

Finished products are pulled out by two rollers. Comparing to other similar die-cutting machines which need extra press cutter to cut the joints, our machine can not only save the cost of press cutters of each machine, but also avoid the troubles of installing and debugging the press cutters, which can magnificently save time. Especially, it can assure better quality of the product appearance when the die-cutting without joints can be realized under many conditions.

And the Chopping Board is made in Germany, and made of NO.65 Manganese Steel.

Die cutting department adopts pneumatic lock version of the device.

图片10_副本.png图片11_副本.png图片12_副本.png


10. The oscillating lower cutting board makes the die-cutting process more steady compared to other similar products and magnificently increased the service life of the cutting board. And we have the same structure Worm Gear as the BOBST.

图片13_副本.png


11. System of Oil-Way: When the machine works, oil will be circulated in order to make the machine reduce friction and increase the machine’s service lifetime.

图片16_副本_副本.png


(Optional)12 .Shaftless: there are three sizes 3, 6, 12 inches. It’s a better choice for customers who have different sizes products.

图片17_副本.png图片18_副本.png图片19_副本.png


13. The following is the Electrical Configuration. All the electrical original adopt imported brands, in line with the European Union CE standard.

The PLC and Frequency Converter we use is made in Delta. The Delta Company has do a particular program for us, with which we have used stably for more then 8 years.

图片20_副本.png


14. Through micro-computer controller, it realizes automatic calculation, automatic alarm and stop by lot.

15. By the action of the entity induction switch, finished product will be automatically lowered down to remain the height of the pilling paper unchanged, during the whole die-cutting process, manual paper-taking is not needed.

图片21_副本_副本.png